BMDGD - 5941 YELLOW TRAFFIC PAINT

  • MSDS: BMDGD
  • Manufacturer: PERVO PAINT CO
  • Product Name: 5941 YELLOW TRAFFIC PAINT
  • National Stock Number: 8010-00N026934
Product Identification

Product ID:5941 YELLOW TRAFFIC PAINT
MSDS Date:05/31/1990
FSC:8010
NIIN:00N026934
MSDS Number: BMDGD

Responsible Party
PERVO PAINT CO
6624 STANFORD AVE
LOS ANGELES, CA 90001
US

Emergency Phone: 213-758-1147

Info Phone: 213-758-1147

Cage: 86483

Contractor
PERVO PAINT CO
LOS ANGELES, CA 90001 US

Telephone: 213-758-1147

Cage: 86483

Ingredients

IARC GRP 2A, NTP GRP 2;

RTECS: 9999999ZZ


SOLVENT NAPHTHA (PETROLEUM) LIGHT ALIPHATIC; (ALIPHATIC

CAS: 64742-89-8

OSHA PEL 400 PPM (MFR)

ACGIH TLV: 400 PPM (MFR)


METHANOL

CAS: 67-56-1

RTECS: PC1400000

OSHA PEL S,200PPM/250STEL

ACGIH TLV: S,200PPM/250STEL; 93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


PROPANE, 1,2-EPOXY-; (PROPYLENE OXIDE)

CAS: 75-56-9

RTECS: TZ2975000

OSHA PEL 100 PPM

ACGIH TLV: 20 PPM; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


ETHANE, 1,1,1-TRICHLORO-; (METHYL CHLOROFORM)

CAS: 71-55-6

RTECS: KJ2975000

OSHA PEL 350 PPM;450 PPM STEL

ACGIH TLV: 350 PPM;450 PPM STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


0.05

CAS: 1344-37-2

OSHA PEL 0.1 PPM, C (CRO*3)

ACGIH TLV: 0.012 MG/M3 (CR)


2-BUTANONE; (METHYL ETHYL KETONE)

CAS: 78-93-3

RTECS: EL6475000

OSHA PEL 200 PPM;300 PPM STEL

ACGIH TLV: 200 PPM;300 PPM STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


P-DIOXANE; (1,4-DIOXANE) (DIETHYLENE ETHER - INHIBITOR IN

CAS: 123-91-1

RTECS: JG8225000

Fraction By Weight: TRACE

OSHA PEL S, 100 PPM

ACGIH TLV: S, 25 PPM; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


CARBON TETRACHLORIDE; (INHIBITOR IN RESIN)

CAS: 56-23-5

RTECS: FG4900000

Fraction By Weight: TRACE

OSHA PEL 10 PPM

ACGIH TLV: S,5PPM/10 STEL,A3 93

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

Hazards

LD50 LC50 Mixture:LD50: (ORAL, RAT) 7 G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:IRRIT/GIDD/HDACH/NAUS. ASPIRATION HAZ.
LEAD POIS EVIDENCED BY TREMORS, LOSS OF APPETITE. INHAL: IRRIT TO
NOSE, THROAT, RESP TRACT. MAY CAUSE CNS DEPRESS. EYE: IRRIT. SKIN:
IRRIT, PRLNG/RPTD CONT CAUSE S DEFAT, DERMAT. INGEST: MAY RSLT IN
VOMIT. ASPIR OF VOMITUS INTO LUNGS CAUSES ASPIR PNEUM EVIDENCED
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:LEAD & PB CMPDS:IARC GRP 2B; CARBON
TETRACHLORIDE:IARC GRP 2B, NTP 2, CHROMIUM & CERTAIN CR CMPDS:
(SUPP DATA)
Effects of Overexposure:HLTH HAZ: BY COUGH, LABORED BRTHG, CYANOSIS.
CARCINOGENIC LVLS IN THIS PROD DO NOT POSE SIGNIFICANT RISK OF
CANCER/ REPROD TOX IN LAB/WORKPLACE, ESP WHEN USED AS REC & IN
COMPLIANCE W/OSHA. CHLOROCARB ON MATLS HAVE PRDCED SENSIT OF
MYOCARDIUM TO EPINEPHRINE IN LAB ANIMALS & MAY HAVE SIMILAR EFT IN
HUMANS. (SUPP DATA)
Medical Cond Aggravated by Exposure:PRE-EXISTING EYE, SKIN AND
RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS
PRODUCT.

First Aid

First Aid:EYES/SKIN: FLUSH W/WATER FOR A MINIMUM OF 15 MINUTES. INHAL:
REMOVE TO FRESH AIR AND PROVIDE OXYGEN. IF NOT BREATHING PROVIDE
ARTIFICIAL RESPIRATION. INGEST: CALL MD IMMEDIATELY . LEAD
POISONING TO BE TREATED BY MD.

Fire Fighting

Flash Point Method:TCC
Flash Point:55.0F,12.8C
Lower Limits:1.3%
Upper Limits:6.7%
Extinguishing Media:CO2, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:BLANKET VAPORS W/EXTINGUISHING MEDIA. WEAR
NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:FLAMM VAPS CAN FORM EXPLOS MIXTURE W/AIR.
CORR VAP PRDCED BY THERMAL DECOMP OF CHLORINATED HYDROCARBONS.
THERMAL DECOMP PRODS MAY INCLUDE HCL & PHOSGENE .

Accidental Release

Spill Release Procedures:WARNING: FLAMMABLE MATERIAL! HANDLING
EQUIPMENT TO BE GROUNDED TO PREVENT SPARKING. USE NIOSH/MSHA
APPROVED RESPIRATORS. USE ABSORBANTS SUCH AS CLAY TO SOAK UP
RESIDUES. FLUSH W/ WATER. DISPOSE RESIDU ES/FLUSHED WATERS I/A/W
REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE COOL, AWAY FROM SPARKS OR OPEN
FLAMES. KEEP FIRE EXTINGUISHERS IN AND CLOSE TO STORAGE AREA.
Other Precautions:EMPTY CONTRS HAVE ALSO POTNTL FOR HAZARDS FROM
REMAINING FUMES. NO SMKG IN AREA OF USE. DO NOT USE IN GEN VICINITY
OF ARC WELDING, OPEN FLAMES OR HOT SURFACES. HEAT &/OR UV RADIATION
MAY CAUSE FORMATI ON OF HCL &/OR PHOSGENE .

Exposure Controls

Respiratory Protection:EITHER ATMOSHPERE SUPPLYING OR AIR PURIFYING
NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST RECOMMENDED. USE MECHANICAL & SPECIAL
VENTILATION AS NEEDED. USE EXPLOSION PROOF VENTILATION EQUIPMENT.
Protective Gloves:CHEMICAL RESISTANT GLOVES RECOMMENDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR SHOES/CLTHG OF NON ABSORBANT NATURE TO
PREVENT OVEREXPOSURE.
Work Hygienic Practices:DO NOT USE AIR DRIED CONTAMINATED CLOTHING
WITHOUT LAUNDERING.
Supplemental Safety and Health
MATLS TO AVOID: OF THIS PROD W/EQUIP CONTAINING ANY ALUMINUM
COMPONENTS. EFTS OF OVEREXP: ADRENOMIMETICS (E.G., EPINEPHRINE) MAY
BE CONTRAINDICATED EXCEPT FOR LIFE-SUSTAINING USES IN HUMANS
ACUTELY/CH RONICALLY EXPOSED TO CHLOROCARBONS . EXPLAN OF CARCIN:
IARC GRP 1, NTP GRP 1, ; (ING 10)

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:165F,74C
Vapor Pres:100
Vapor Density:4.5
Spec Gravity:1.76
Solubility in Water:NEGLIGIBLE
Appearance and Odor:YELLOW LIQUID WITH AROMATIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING/REDUCING AGENTS IN CONJUNCTION W/ HEAT. AVOID CONT
W/ANY FREE RADICAL GENERATORS. AVOID USE (SUPP DATA)
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS, HEATED
SURFACES. STORE IN CLOSED CONTAINERS.
Hazardous Decomposition Products:OXIDES OF CARBON, HYDROGEN CHLORIDE,
OXIDES OF LEAD, CHROMIUM, COMPLEX ORGANIC STRUCTURES. PHOSGENE .
Conditions to Avoid Polymerization:HEAT, POLYMERIZATION INITIATORS.

Disposal

Waste Disposal Methods:TO BE DISPOSED OF IN CLOSED METAL CONTAINERS IN
ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.